Using 3D to make comic books part 2

Using 3D to make comic books, for a beginner, DAZ Studio is a good one. It’s free, it’s not too difficult to handle until you start getting into the more advanced features, but for setting up and lighting a scene, it’s excellent for learning. Personally, I dove in with Poser 7.

Poser’s good, but I found myself often having trouble using it despite having a book to guide me. Other programs offer more heavy-duty features for making props, clothing, hair and other things, but as they get fancier, they get more expensive.

A leading complaint against using 3D I’ve often mentioned is that 3D figures and clothes look stiff and lifeless. You’ll be confronted by this, so be ready for it. I’ve begun to counteract it by making things more dynamic. Dynamic meaning realistic simulation of cloth in particular.

The other half of that complaint likely has to do with the lighting of the actor and its textures. That would mean it’s wise to pay close attention to the lighting of the scene when you do renders.

Just like pencil and paper, you need to pay close attention to even the smallest details in your renders as these are actually more noticeable in 3D unless you use depth of field to blur out the boo-boos in the background. What about the boo-boos of the character?

Some don’t like to be posed certain ways and can even poke through their clothes despite fixes. Well, post work is useful if you just can’t get the 3D to behave the way you want it to. The GIMP is an excellent freebie image editor that’s lightweight and easy on the computer.

One thing that’s been extremely handy for me is the ability to render scenes even on my little 2-in-1 Windows 10 tablet. Taking my library on the go and setting up characters, or even scenes has been a heavy-duty time saver, but it just doesn’t have the power of the computer.

That means I need programs that aren’t resource intense. DAZ and GIMP are a spectacular combination for this. Unless I setup a heavily complicated scene, my little tablet can render it. If I do setup a heavily complicated scene, I can save it to render on the computer.

 

 

Using 3D to make comic books part 3

STOP! Before you read part 3 of Using 3D to make comic books, you should read part 1 and part 2! If you’ve read them already, do feel free to continue reading!

Using 3D to make comics scenes rendered on my tablet while still out and about means I can pull the render into GIMP if I need to do post work, too. Literally, my work can go with me anywhere. Sure, the tablet can’t do everything the computer can, but it does a nice job of getting things started for the computer, which saves some time. Then I’m able to open the file in the computer and pick up where I left off while I was out.

Okay, that’s putting together the scene and making sure it’s a real eye pleaser, what about making it into a comic book? I wouldn’t doubt there’s other programs out there, but Manga Studio served me well for a long time before I discovered Comic Life. Now, you’ll notice all these programs have no links attached. I’m not affiliated with them, merely recommending them.

For my purposes, I wish I could combine the two into one program, but that seems quite unlikely. Manga Studio is indeed meant for hand-drawn comics and especially manga with a staggering array of tools and goodies for that purpose. I especially loved its layers palette, but it had its shortcomings for me, as well.

When I found Comic Life, I was struggling to create extended dialogue balloons in particular with Manga Studio. I didn’t have the expensive version of the program and couldn’t afford to get it anyway. I’d found a trial version of it and thought I might be able to setup my 3D scenes inside it, but found nothing for importing my own 3D models and accessories and its library limited to what it came with.

Comic Life offered the dialogue balloons I wanted and a nice assortment of other tools. It’s proven to be more intended for importing images and even fixing them in the program, which suited me far better as a 3D artist. I could just drag and drop my renders into the panel frames and if they needed fixing, I could do it right there without any headaches.

Using 3D to make comic books part 2

Using 3D to make comic books, for a beginner, DAZ Studio is a good one. It’s free, it’s not too difficult to handle until you start getting into the more advanced features, but for setting up and lighting a scene, it’s excellent for learning. Personally, I dove in with Poser 7.

Poser’s good, but I found myself often having trouble using it despite having a book to guide me. Other programs offer more heavy-duty features for making props, clothing, hair and other things, but as they get fancier, they get more expensive.

A leading complaint against using 3D I’ve often mentioned is that 3D figures and clothes look stiff and lifeless. You’ll be confronted by this, so be ready for it. I’ve begun to counteract it by making things more dynamic. Dynamic meaning realistic simulation of cloth in particular.

The other half of that complaint likely has to do with the lighting of the actor and its textures. That would mean it’s wise to pay close attention to the lighting of the scene when you do renders.

Just like pencil and paper, you need to pay close attention to even the smallest details in your renders as these are actually more noticeable in 3D unless you use depth of field to blur out the boo-boos in the background. What about the boo-boos of the character?

Some don’t like to be posed certain ways and can even poke through their clothes despite fixes. Well, post work is useful if you just can’t get the 3D to behave the way you want it to. The GIMP is an excellent freebie image editor that’s lightweight and easy on the computer.

One thing that’s been extremely handy for me is the ability to render scenes even on my little 2-in-1 Windows 10 tablet. Taking my library on the go and setting up characters, or even scenes has been a heavy-duty time saver, but it just doesn’t have the power of the computer.

That means I need programs that aren’t resource intense. DAZ and GIMP are a spectacular combination for this. Unless I setup a heavily complicated scene, my little tablet can render it. If I do setup a heavily complicated scene, I can save it to render on the computer.

 

 

Using 3D to make comic books part 2

Using 3D to make comic books, for a beginner, DAZ Studio is a good one. It’s free, it’s not too difficult to handle until you start getting into the more advanced features, but for setting up and lighting a scene, it’s excellent for learning. Personally, I dove in with Poser 7.

Poser’s good, but I found myself often having trouble using it despite having a book to guide me. Other programs offer more heavy-duty features for making props, clothing, hair and other things, but as they get fancier, they get more expensive.

A leading complaint against using 3D I’ve often mentioned is that 3D figures and clothes look stiff and lifeless. You’ll be confronted by this, so be ready for it. I’ve begun to counteract it by making things more dynamic. Dynamic meaning realistic simulation of cloth in particular.

The other half of that complaint likely has to do with the lighting of the actor and its textures. That would mean it’s wise to pay close attention to the lighting of the scene when you do renders.

Just like pencil and paper, you need to pay close attention to even the smallest details in your renders as these are actually more noticeable in 3D unless you use depth of field to blur out the boo-boos in the background. What about the boo-boos of the character?

Some don’t like to be posed certain ways and can even poke through their clothes despite fixes. Well, post work is useful if you just can’t get the 3D to behave the way you want it to. The GIMP is an excellent freebie image editor that’s lightweight and easy on the computer.

One thing that’s been extremely handy for me is the ability to render scenes even on my little 2-in-1 Windows 10 tablet. Taking my library on the go and setting up characters, or even scenes has been a heavy-duty time saver, but it just doesn’t have the power of the computer.

That means I need programs that aren’t resource intense. DAZ and GIMP are a spectacular combination for this. Unless I setup a heavily complicated scene, my little tablet can render it. If I do setup a heavily complicated scene, I can save it to render on the computer.

 

 

What makes 3D so difficult?

What makes 3D so difficult to handle is that it has a very steep learning curve more often than not. I’ve found people that assume because the computer does a lot of the work that 3D isn’t art and it’s lazy to use. Let me assure you: nothing is further from the truth!

True, some programs, like DAZ Studio or even Poser are good for beginners or hobbyists and make setting up a scene reasonably easy to do, but that doesn’t mean the rendered art will be good quality. Like pencil and paper, there’s basic techniques and much more advanced ones. It’s the difference between a stick figure with dots for eyes and a line for a smile and a fully detailed anatomically correct figure that’s nicely lit and realistic.

Anyone can draw a stick figure, but that much higher quality figure with all the details and lighting? That can take years of practice. The very same holds true of 3D art.

First and foremost, it’s very much art. If it isn’t, it shouldn’t be in movies as a special effect since it takes special effects artists to use it for movies. What are they using if it isn’t art? Secondly, it’s constantly changing and improving, so just because some amateur hasn’t yet mastered even the basics isn’t a reason to tell them to use pencil and paper.

Four years ago, I knew next to nothing about 3D art. I posed bald, nude figures in Poser with default lighting and painted hair and clothes in Photoshop. As I learned more, my methods changed. Figures began having clothes and hair, I began experimenting with lights and camera angles.

Being a 3D artist is a lot like being a movie director. You have to be able to work with all the various departments to get the scene just right. Actors, wardrobe, hair, makeup, lights, cameras and other things have to be prepared for the scene to be complete. Finding, creating and effectively rendering the scene elements is more complicated than some might imagine. Even when you think the scene looks the way you want it, it doesn’t mean the final render will have the desired result. That means post work, which can get almost as complicated as setting up the scene in the first place.

The truth is there’s a million ways a scene can go wrong. True, pencil and paper mean you can simply erase the part that’s not the way you want it, but what if it’s already inked? That means hours with white-out or something similar to correct the problem.

Lots of ways to mess up, lots of ways to create incredible art. It’s a matter of time, patience and a lot of practice.

Using 3D to make comic books part 3

STOP! Before you read part 3 of Using 3D to make comic books, you should read part 1 and part 2! If you’ve read them already, do feel free to continue reading!

Using 3D to make comics scenes rendered on my tablet while still out and about means I can pull the render into GIMP if I need to do post work, too. Literally, my work can go with me anywhere. Sure, the tablet can’t do everything the computer can, but it does a nice job of getting things started for the computer, which saves some time. Then I’m able to open the file in the computer and pick up where I left off while I was out.

Okay, that’s putting together the scene and making sure it’s a real eye pleaser, what about making it into a comic book? I wouldn’t doubt there’s other programs out there, but Manga Studio served me well for a long time before I discovered Comic Life. Now, you’ll notice all these programs have no links attached. I’m not affiliated with them, merely recommending them.

For my purposes, I wish I could combine the two into one program, but that seems quite unlikely. Manga Studio is indeed meant for hand-drawn comics and especially manga with a staggering array of tools and goodies for that purpose. I especially loved its layers palette, but it had its shortcomings for me, as well.

When I found Comic Life, I was struggling to create extended dialogue balloons in particular with Manga Studio. I didn’t have the expensive version of the program and couldn’t afford to get it anyway. I’d found a trial version of it and thought I might be able to setup my 3D scenes inside it, but found nothing for importing my own 3D models and accessories and its library limited to what it came with.

Comic Life offered the dialogue balloons I wanted and a nice assortment of other tools. It’s proven to be more intended for importing images and even fixing them in the program, which suited me far better as a 3D artist. I could just drag and drop my renders into the panel frames and if they needed fixing, I could do it right there without any headaches.

Using 3D to make comic books part 2

Using 3D to make comic books, for a beginner, DAZ Studio is a good one. It’s free, it’s not too difficult to handle until you start getting into the more advanced features, but for setting up and lighting a scene, it’s excellent for learning. Personally, I dove in with Poser 7.

Poser’s good, but I found myself often having trouble using it despite having a book to guide me. Other programs offer more heavy-duty features for making props, clothing, hair and other things, but as they get fancier, they get more expensive.

A leading complaint against using 3D I’ve often mentioned is that 3D figures and clothes look stiff and lifeless. You’ll be confronted by this, so be ready for it. I’ve begun to counteract it by making things more dynamic. Dynamic meaning realistic simulation of cloth in particular.

The other half of that complaint likely has to do with the lighting of the actor and its textures. That would mean it’s wise to pay close attention to the lighting of the scene when you do renders.

Just like pencil and paper, you need to pay close attention to even the smallest details in your renders as these are actually more noticeable in 3D unless you use depth of field to blur out the boo-boos in the background. What about the boo-boos of the character?

Some don’t like to be posed certain ways and can even poke through their clothes despite fixes. Well, post work is useful if you just can’t get the 3D to behave the way you want it to. The GIMP is an excellent freebie image editor that’s lightweight and easy on the computer.

One thing that’s been extremely handy for me is the ability to render scenes even on my little 2-in-1 Windows 10 tablet. Taking my library on the go and setting up characters, or even scenes has been a heavy-duty time saver, but it just doesn’t have the power of the computer.

That means I need programs that aren’t resource intense. DAZ and GIMP are a spectacular combination for this. Unless I setup a heavily complicated scene, my little tablet can render it. If I do setup a heavily complicated scene, I can save it to render on the computer.

 

 

Using 3D to make comic books part 2

Using 3D to make comic books, for a beginner, DAZ Studio is a good one. It’s free, it’s not too difficult to handle until you start getting into the more advanced features, but for setting up and lighting a scene, it’s excellent for learning. Personally, I dove in with Poser 7.

Poser’s good, but I found myself often having trouble using it despite having a book to guide me. Other programs offer more heavy-duty features for making props, clothing, hair and other things, but as they get fancier, they get more expensive.

A leading complaint against using 3D I’ve often mentioned is that 3D figures and clothes look stiff and lifeless. You’ll be confronted by this, so be ready for it. I’ve begun to counteract it by making things more dynamic. Dynamic meaning realistic simulation of cloth in particular.

The other half of that complaint likely has to do with the lighting of the actor and its textures. That would mean it’s wise to pay close attention to the lighting of the scene when you do renders.

Just like pencil and paper, you need to pay close attention to even the smallest details in your renders as these are actually more noticeable in 3D unless you use depth of field to blur out the boo-boos in the background. What about the boo-boos of the character?

Some don’t like to be posed certain ways and can even poke through their clothes despite fixes. Well, post work is useful if you just can’t get the 3D to behave the way you want it to. The GIMP is an excellent freebie image editor that’s lightweight and easy on the computer.

One thing that’s been extremely handy for me is the ability to render scenes even on my little 2-in-1 Windows 10 tablet. Taking my library on the go and setting up characters, or even scenes has been a heavy-duty time saver, but it just doesn’t have the power of the computer.

That means I need programs that aren’t resource intense. DAZ and GIMP are a spectacular combination for this. Unless I setup a heavily complicated scene, my little tablet can render it. If I do setup a heavily complicated scene, I can save it to render on the computer.

 

 

What makes 3D so difficult?

What makes 3D so difficult to handle is that it has a very steep learning curve more often than not. I’ve found people that assume because the computer does a lot of the work that 3D isn’t art and it’s lazy to use. Let me assure you: nothing is further from the truth!

True, some programs, like DAZ Studio or even Poser are good for beginners or hobbyists and make setting up a scene reasonably easy to do, but that doesn’t mean the rendered art will be good quality. Like pencil and paper, there’s basic techniques and much more advanced ones. It’s the difference between a stick figure with dots for eyes and a line for a smile and a fully detailed anatomically correct figure that’s nicely lit and realistic.

Anyone can draw a stick figure, but that much higher quality figure with all the details and lighting? That can take years of practice. The very same holds true of 3D art.

First and foremost, it’s very much art. If it isn’t, it shouldn’t be in movies as a special effect since it takes special effects artists to use it for movies. What are they using if it isn’t art? Secondly, it’s constantly changing and improving, so just because some amateur hasn’t yet mastered even the basics isn’t a reason to tell them to use pencil and paper.

Four years ago, I knew next to nothing about 3D art. I posed bald, nude figures in Poser with default lighting and painted hair and clothes in Photoshop. As I learned more, my methods changed. Figures began having clothes and hair, I began experimenting with lights and camera angles.

Being a 3D artist is a lot like being a movie director. You have to be able to work with all the various departments to get the scene just right. Actors, wardrobe, hair, makeup, lights, cameras and other things have to be prepared for the scene to be complete. Finding, creating and effectively rendering the scene elements is more complicated than some might imagine. Even when you think the scene looks the way you want it, it doesn’t mean the final render will have the desired result. That means post work, which can get almost as complicated as setting up the scene in the first place.

The truth is there’s a million ways a scene can go wrong. True, pencil and paper mean you can simply erase the part that’s not the way you want it, but what if it’s already inked? That means hours with white-out or something similar to correct the problem.

Lots of ways to mess up, lots of ways to create incredible art. It’s a matter of time, patience and a lot of practice.

What makes 3D so difficult?

What makes 3D so difficult to handle is that it has a very steep learning curve more often than not. I’ve found people that assume because the computer does a lot of the work that 3D isn’t art and it’s lazy to use. Let me assure you: nothing is further from the truth!

True, some programs, like DAZ Studio or even Poser are good for beginners or hobbyists and make setting up a scene reasonably easy to do, but that doesn’t mean the rendered art will be good quality. Like pencil and paper, there’s basic techniques and much more advanced ones. It’s the difference between a stick figure with dots for eyes and a line for a smile and a fully detailed anatomically correct figure that’s nicely lit and realistic.

Anyone can draw a stick figure, but that much higher quality figure with all the details and lighting? That can take years of practice. The very same holds true of 3D art.

First and foremost, it’s very much art. If it isn’t, it shouldn’t be in movies as a special effect since it takes special effects artists to use it for movies. What are they using if it isn’t art? Secondly, it’s constantly changing and improving, so just because some amateur hasn’t yet mastered even the basics isn’t a reason to tell them to use pencil and paper.

Four years ago, I knew next to nothing about 3D art. I posed bald, nude figures in Poser with default lighting and painted hair and clothes in Photoshop. As I learned more, my methods changed. Figures began having clothes and hair, I began experimenting with lights and camera angles.

Being a 3D artist is a lot like being a movie director. You have to be able to work with all the various departments to get the scene just right. Actors, wardrobe, hair, makeup, lights, cameras and other things have to be prepared for the scene to be complete. Finding, creating and effectively rendering the scene elements is more complicated than some might imagine. Even when you think the scene looks the way you want it, it doesn’t mean the final render will have the desired result. That means post work, which can get almost as complicated as setting up the scene in the first place.

The truth is there’s a million ways a scene can go wrong. True, pencil and paper mean you can simply erase the part that’s not the way you want it, but what if it’s already inked? That means hours with white-out or something similar to correct the problem.

Lots of ways to mess up, lots of ways to create incredible art. It’s a matter of time, patience and a lot of practice.